J.-G. Liu and J.-S. Chen, Frequency-selective Adaptive Filtering for Noise Suppression of Discrete Signals, Technisches Messen, in German, tm 11/2003, in press
J.-G. Liu, Accuracy improvement in computer controlled measuring and test systems, Technisches Messen, in German, tm 9/2002, pp.390-398
J.-G. Liu, C. Schmidt-Hattenberger, and G. Borm, Dynamic Strain Measurement with a Fibre Bragg Grating Sensor System, Measurement, Vol. 32, no.2, pp. 151-161, September 2002
J.-G. Liu, Self-correction Algorithms and Applications to Signal Processing, Measurement, Vol. 31, no.2, pp. 107-116, March 2002
W. Ricken, J.-G. Liu and W.-J. Becker, GMR- and eddy current sensor in the use of stress measurement, Sensors and Actuators A, Vol. 91, pp. 42-45, 2001
J.-G. Liu; W.-J. Becker; T. Gerhold; W. Ricken: Parameter separation of measuring systems and Sensors by signal processing, Technisches Messen, in German, tm 11/2000, pp. 484-490
J.-G. Liu and U. Frühauf, Self-Calibration Measuring Methods and Application to Measurements of Electrical Quantities, Measurement, vol. 26, no.2, August 1999, pp. 129-141
J.-G. Liu, U. Frühauf and A. Schönecker, Accuracy Improvement of Impedance Measurements by Using the Self-Calibration, Measurement, Vol. 25, no. 3, April 1999, pp. 213-225
Journal Papers Before 1990
J.-G. Liu, Automatic Measuring System of Dual-frequency Laser Interferometer, Electronic Mechanical Engineering, in Chinese, pp. 8-11, No.3, 1987
J.-G. Liu and S.-X. Duanmu, Measuring Method for Examining the Error of Inductosyn, Machine Tool & Hydraulics, in Chinese, pp.40-45, No.4, 1988
J.-G. Liu and S.-X. Duanmu: Initial Experiment and Analysis for the Error of Inductosyn in its Range of Installation and Alignment, Journal of Shanghai University of Science and Technology, in Chinese, Vol. 8, No.1, 1986
J.-G. Liu and S.-X. Duanmu, The summarization of computer aided positioning error compensation & correction, Grinder & Grinding, in Chinese, pp.4-11, No.1, 1987
J.-G. Liu and S.-X. Duanmu, Method of microcomputer aided positioning error compensation, Chinese Journal of Scientific Instrument, in Chinese, pp.274-279, Vol.8, No.3, 1987
J.-G. Liu and S.-X. Duanmu, Modelling of positioning error of machine tools, Machine Tool & Hydraulics, in Chinese, pp. 23-32, No.6, 1986
J.-G. Liu and S.-X. Duanmu: Methods of horizontal sectioning in microcomputer aided error compensation, Shanghai Machine Tool, in Chinese, pp.9-13, No.3, 1986
J.-G. Liu and S.-X. Duanmu, A research on the positioning error compensation of machine tools by microcomputer, Shanghai Machine Tool, in Chinese, pp.16-20, No.1, 1987
J.-G. Liu, Microcomputer aided positioning error compensation system, Machine Building Industry Automation, in Chinese, pp.29-34, No.2, 1987
