Aufklappbarer Hall Effekt DC/AC Stromsensor CYHCD-S3K mit analoge und digitale Ausgänge
Zurück
The sensor CYHCD-S3K is a Hall Effect current sensor for the measurement of DC/AC current. The... mehr
Aufklappbarer Hall Effekt DC/AC Stromsensor CYHCD-S3K mit analoge und digitale Ausgänge
The sensor CYHCD-S3K is a Hall Effect current sensor for the measurement of DC/AC current. The sensor has galvanic isolation between the high-power primary conductor and the secondary electronic circuit. The sensor has analog and different digital output signals under different power supplies. The data communication between the sensor and digital equipment can be realized directly through the interface RS-485 MODBUS.
Produkteigenschaften
- DC/AC Strommessung
- Hohe Messgenauigkeit
- Analoge Outputspannung: 5VDC±2.5x √2 VAC
- Digitale Ausgänge (RS-485 Modbus)
- Hohe Isolation zwischen primärer und sekundärer Schaltung
- Keine Einfügungsverluste
Anwendungen
- Photovoltaik-Anlagen
- Akku Banken, z. B. Überwachung von Laststrom und Ladestrom, Prüfeinsatz,
- Transportation, Messung von Zugkraft
- Phasenanschnittssteuerte Heizungen
- Direkte Verbindung zu PLC
- Detektion von Motor-Stillständen und Kurzschlüssen
- Industrie Instrumente
Nennstrom (Input): | 0-25A, 0-30A, 0-40A, 0-50A, 0-60A, 0-70A, 0-80A, 0-90A, 0-100A, 0-200A, 0-300A, 0-400A, 0-500A |
Versorgungsspannung: | +12 V DC, +15 V DC, +24 V DC |
Analoger Ausgangssignal: | 2.5V ± 2.5V AC/DC, 5V ± 5V AC/DC |
Digital Ausgang: | Current I, Frequency F |
Interface: | RS485, MODBUS |
Baudrate (bps): | 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K, 115.2K |
Linearität: | Analogue: ±0.5%FS for 25A~49A, Analogue: ±0.2%FS for 50A~500A, Digital: ±0.2%FS |
Genauigkeit: | Analogue: ±1.0%FS for 25A~49A, Analogue: ±0.5%FS for 50A~500A, Digital: ±0.5%FS |
Fenstertyp: | Rund |
Fenstergröße (mm): | Ø 20 |
Betriebstemperatur: | -40°C ~ +85°C |
Zuletzt angesehen