CYD2462 High Sensitivity Omnipolar Hall Effect Switch
Back- Article-Nr: CYD2462
- Serial-Nr: CYD2462
- Request on this Article
- Data sheet download
- Data sheet download (Deutsch)
The CYD2462-series, produced with BiCMOS technology, is a chopper-stabilized Hall Effect Sensor that offers a magnetic sensing solution with superior sensitivity stability over temperature and integrated protection features. Superior high-temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over moulding, temperature dependencies, and thermal stress. Each device includes on a single silicon chip a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and an open-drain output to sink up to 20mA. An on board regulator permits with supply voltages of 2.5 to 24V which makes the device suitable for a wide range of industrial and automotive applications. The CYD2462 is available in a 3-pin SIP and a plastic SOT23-3 surface mount package. Both packages are lead (Pb) free, with 100% matte tin lead frame plating.
FEATURES
- High chopping frequency
- 2.5V to 24V power supply
- Superior temperature stability
- Reverse battery protection (up to 28V)
- Over-voltage protection at all pins
- Robust EMC performance
- ROHS compliant
APPLICATIONS
- Flow meters
- Magnetic encoding
- Proximity sensing
- Garage door openers
- Power sliding doors
- Sunroofs motor
Package/Size: | SIP3/4.0x3.0x1.5mm, SOT23/2.9x1.6x1.1mm |
Power Supply: | 2.5V ~ 24V DC |
Hysteresis: | 1.0 mT |
Operating Temperature: | -40°C ~ +150°C |
Operation Point: | 1.5 mT ~ 3.5 mT |
Release Point: | 1.0 mT ~ 3.0 mT |
Max. Supply current/voltage: | 2mA/24V |