Differential Magnetoresistive Sensor CY-DMR-01H-B, Power Supply: 5 V DC, Output: Single output, Alternative for: FP210D250-22(Siemens/Infineon)
Back- Article-Nr: CY-DMR-01H-B
- Serial-Nr: CY-DMR-01H
- Request on this Article
- Data Sheet Download
- Data Sheet Download (German)
- RoHS Declaration of Conformity
The differential magnetoresistive sensor CY-DMR-01H consists of two series coupled magneto... more
Differential Magnetoresistive Sensor CY-DMR-01H-B, Power Supply: 5 V DC, Output: Single output, Alternative for: FP210D250-22(Siemens/Infineon)
The differential magnetoresistive sensor CY-DMR-01H consists of two series coupled magneto resistors (D-type InSb/NiSb semiconductor resistors whose value can be magnetically controlled), which are mounted onto an insulated ferrite substrate. The sensor is encapsulated in a metallic or plastic package and has 3 connection terminals. The basic resistance of the total system is 2 x 600Ω. A permanent magnet, which supplies a biasing magnetic field, is fixed on the base of the sensor.
Characteristics
- Sensing over wide rotation speed range
- Robust metallic or plastic housing
- Signal amplitude is speed independent
- Biasing magnet built in
- Best suited for harsh environments
Typical applications
- Speed detection
- Position detection
- Rotation detection
- Angle encoder
- Linear position sensing
Power Supply: | +5 V DC |
Operating Temperature: | -30°C ~ +100°C |
Cross Reference: | FP212D250-22 |
Total Resistance: | 900 Ω – 1600 Ω |
Cut-off Frequency: | >20kHz |
Output Signal: | ≥900mV |
Data sheets to download:
Viewed