Hall Effect Gear Tooth Sensor CYGTS102DC, Output type: RC (NPN or PNP), Power Supply: 4.5 V ~ 24 V DC, Alternative for: 1GT101DC, 1GT103DC, 1GT105DC (Honeywell)
Product information "Hall Effect Gear Tooth Sensor CYGTS102DC, Output type: RC (NPN or PNP), Power Supply: 4.5 V ~ 24 V DC, Alternative for: 1GT101DC, 1GT103DC, 1GT105DC (Honeywell)"
CYGTS102DC Hall Effect Gear Tooth Sensor is designed by using a Hall-Effect sensor element, which can accurately detect the movement of ferrous metal objects. This specially designed gear tooth sensor with a biasing magnet and internal denoising filter is sealed in resin for physical protection and cost effective installation. The CYGTS102DC Sensor works according to the detection of peak magnetic field change. This Unit functions under power supply from 4.5VDC to 24VDC. Two signals (one sinusoid wave and one square wave) are output directly through the output terminal of the operational amplifier. The sensor will not be damaged if power is inadvertently wired inversely.
The CYGTS102DC may be considered as a possible replacement or cross-reference type for 1GT101DC, 1GT103DC and 1GT105DC, depending on the specific application. The listed cross-reference types are provided for identification and comparison purposes only. Please verify suitability and compatibility using the technical specifications.
Features
- Sensing ferrous metal targets
- Operational amplifier directly output signal
- Good signal-to-noise ratio
- Excellent low speed performance
- Output amplitude not dependent on RPM
- Fast operating speed, over 15kHz
- EMI resistant
- Reverse polarity protection and transient protection
- Wide operating temperature -40°C ~ +125°C
Applications
Automotive and Heavy Duty Vehicles:
- Camshaft and crankshaft speed and position
- Transmission speed
- Tachometers
- Anti-skid/traction control
Industrial Areas:
- Sprocket speed
- Chain link conveyor speed/distance
- Stop motion detector
- High speed and low cost proximity
- Tachometers, counters.
Information about product safety:
Manufacturer/ EU Responsible Person:
Company name: ChenYang Technologies GmbH & Co.KG
Address: Markt Schwabener Str. 8; 85464 Finsing; Deutschland
E-Mail: info@chenyang.de
Phone: +49 8121 2574100
| Cross Reference: | 1GT101DC, 1GT103DC, 1GT105DC |
|---|---|
| Diameter/Screw Size: | 17,8 (diameter) |
| Frequency Bandwith: | over 15kHz |
| Length: | 500 mm |
| Operating Temperature: | -40°C ~ +125°C |
| Output Type: | NPN (RC), PNP (RC) |
| Power Supply: | 4.5V ~ 24V DC |
| Rise/Fall time: | 5,5µs / 10µs |
| Sensing Object : | ferrous metal targets |
| Sensing gap/distance: | 0.2mm ~ 4.0mm |
Manufacturer:
Company name: ChenYang Technologies GmbH & Co.KG
Address: Markt Schwabener Str. 8; 85464 Finsing; Deutschland
E-Mail: info@chenyang.de
Phone: +49 8121 2574100
Similar Items
