Unipolar Hall Effect Switch Ics CYD1102G, Power Supply: 3-28V, Supply current: 10mA,Operating Temperature: -40 ~+150°C

Back
Unipolar Hall Effect Switch Ics CYD1102G, Power Supply: 3-28V, Supply current: 10mA,Operating Temperature: -40 ~+150°C
The CYD1102G is an integrated Hall Effect sensor designed for electronic commutation of... more
Unipolar Hall Effect Switch Ics CYD1102G, Power Supply: 3-28V, Supply current: 10mA,Operating Temperature: -40 ~+150°C

The CYD1102G is an integrated Hall Effect sensor designed for electronic commutation of brush-less DC motor applications. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and open-collector output. An internal band gap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range. A north pole of sufficient strength will turn the output ON. In the absence of a magnetic field, the output is OFF.

Characteristics

  • Wide operating voltage range 3V to 28V
  • Maximum output sink current 50mA 
  • Open collector pre-driver
  • Reverse polarity protection
  • Package : SIP-3L 
Operating Temperature: -40°C~ +150°C
Package/Size: SIP3L/4.1x3.05x1.50mm
Max. Supply current/voltage: 10 mA
Operation Point: 14 mT
Release Point: 6.0 mT
Hysteresis: 3.0 mT ~ 12.0 mT
Power Supply: 3.0V ~ 28V DC
Viewed