Self-Adjusting Hall Effect Gear Tooth Sensor IC CYGTS9802 with Complementary Output, Output: Complementary Voltage Outputs, Power Supply: 4 V ~ 24 V DC
Back- Article-Nr: CYGTS9802
- Serial-Nr: CYGTS9802
- Request on this Article
- Data Sheet Download
- Data Sheet Download (German)
The CYGTS9802 is a sophisticated IC featuring an on-chip 12-bit A/D Converter and logic that acts as a digital sample and hold circuit. A separate 6-bit D/A converter provides a fixed hysteresis. The sensor does not have a chopper delay. It uses a single Hall plate which is immune to rotary alignment problems. The bias magnet can be from 1000GS to 4000Gs. As the signal is sampled, the logic recognizes an increasing or decreasing flux density. The OUT will turn on (BOP) after the flux has reached its peak and decreased by an amount equal to the hysteresis. Similarly the OUT will turn off (BRP) after the flux has reached its minimum value and increased by an amount equal to the hysteresis. The complementary outputs (OUT and OUTB) are provided in this sensor. The OUTB will turn off after the flux has reached its peak and decreased by an amount equal to the hysteresis. Similarly the OUTB will turn on after the flux has reached its minimum value and increased by an amount equal to the hysteresis.
Characteristics
- High sensitivity
- Complementary output signal
- True zero speed detection
- Short circuit protection
- Insensitive to orientation
- Wide voltage working range
- Self-adjusting magnetic range
- On-chip 12 bit A/D converter
- High speed operation
- No chopper delay applications
- RoHS compliant
Applications
Automotive and Heavy Duty Vehicles:
- Camshaft and crankshaft speed and position
- Transmission speed
- Tachometers
- Anti-skid/traction control
Industrial Areas:
- Sprocket speed
- Chain link conveyor speed/distance
- Stop motion detector
- High speed low cost proximity
- Tachometers, counters.
Operating Temperature: | -40°C~ +150°C |
Rise/Fall time: | 0.4µs/0.4µs |
Output Signal: | Complementary Voltage Outputs |
Package/Size: | SIP4/5.22x3.65x1.55mm |
Sensing gap/distance: | 1.0mm ~ 3.0mm |
Bias Magnetic Field: | 100~400mT |
Power Supply: | 4 V ~ 24 V DC |