Bipolar Hall Effect Latching Switch Ics CYD505, Power Supply: 2.7V -30V, supply current: 25mA
Back- Article-Nr: CYD505-UA
- Serial-Nr: CYD505
- Request on this Article
- Data sheet download
- Data sheet download (Deutsch)
CYD505 Hall Effect Switch is a monolithic integrated circuit which switches in response to... more
Bipolar Hall Effect Latching Switch Ics CYD505, Power Supply: 2.7V -30V, supply current: 25mA
CYD505 Hall Effect Switch is a monolithic integrated circuit which switches in response to magnetic field. If a magnetic field with flux lines perpendicular to the sensitive area is applied to the sensor, the biased Hall plate forces a Hall voltage proportional to this field. The Hall voltage is compared with the actual threshold level in the comparator. If the magnetic field exceeds the threshold levels, the output stage is switched to the appropriate state. The built-in hysteresis eliminates oscillation and provides switching behavior of output without bouncing.
Applications
- Brushless DC motors
- Speed measurement
- Counting
- Angle position detection
- Proximity detection
- Home applications
- Home safety
Features
- 2.7V to 30V operation voltage
- Overvoltage protection capability up to 40 V
- High accuracy bipolar switch
- Built-in dynamic offset cancellation
- Open drain output
- Low thermal drift of magnetic sensing
- Qualified according to AEC-Q100 test standard
Operating Temperature: | -40°C ~ +150°C |
Package/Size: | TO92S/4.1x3.18x1.58mm, SOT23-3L/ 2.92 x 1.60 x 1.15 mm |
Power Supply: | 2.7V ~ 30V DC |
Max. Supply current/voltage: | 25mA/30V |
Operation Point: | 13.5 mT |
Release Point: | -13.5 mT |
Hysteresis: | 27mT |
Data sheets to download:
Viewed